1336F-B030-AE-EN-HAS2

The 1336F-B030-AE-EN-HAS2 drive is a digital motor control drive from the 1336 PLUS II series. It is designed for AC input voltage and it delivers its full rated output when connected to a 3-phase AC input voltage source. The drive supports single-phase AC input too, but only with derated output. The input voltage rating of the drive is 380 to 480 Volts AC. Allen-Bradley has designed the 1336F-B030-AE-EN-HAS2 drive for vertical mounting and the drive comes with a heatsink. The mounting options include drive mounting with the heatsink either inside or outside the cabinet. The enclosure of the 1336F-B030-AE-EN-HAS2 drive is EMC-compatible. The enclosure’s protection rating is IP 20 and it is a NEMA Type 1 enclosure. Even though the drive can be mounted adjacent to other drives, there needs to be enough space between all adjacent drives to facilitate smooth airflow and prevent overheating. The spacing between 2 horizontally adjacent drives should be at least 101.6 millimeters and the spacing between 2 vertically adjacent drives should be at least 152.4 millimeters.

The constant torque input current rating for the Allen-Bradley 1336F-B030-AE-EN-HAS2 1336 PLUS II series motor control drive is 46 Amps and the output current rating is 45 Amps. The variable torque input current rating is 49 Amps and the output current rating is 48 Amps. Optional fuses and circuit breakers with the correct ratings can be used to protect the input side of the 1336F-B030-AE-EN-HAS2 drive. The maximum rating for an input circuit breaker is 150 Amps. The minimum and maximum ratings for time delay fuses are 70 Amps and 90 Amps, respectively. The minimum and maximum ratings for non-time delay fuse are 70 Amps and 150 Amps, respectively. The motor circuit protector rating is 70 Amps. The HMI on the 1336F-B030-AE-EN-HAS2 motor control  drive is a programmer/controller HMI with a digital potentiometer.