1336F-B030-AE-EN-HAS2-L6

The Allen-Bradley 1336F-B030-AE-EN-HAS2-L6 1336 PLUS II series motor control drive is a 30-Horsepower industrial AC drive. Protective features on this 1336 PLUS II series drive include overvoltage stall, fault reset input, and overcurrent stall protective features and 6 drive alarms. Special functions on the 1336F-B030-AE-EN-HAS2-L6 drive include a traverse function, a process PI controller, an auto economizer, auto-tuning, and a step logic function. Some of the key operational features on the drive include multilingual selection, sensorless vector control, and selectable Volts/Hertz control. The programmable features on the 1336F-B030-AE-EN-HAS2-L6 drive include the slip compensation, dynamic braking, DC injection braking, 3 skip frequencies, proactive current limit, and flying start features. The planar construction of the drive eliminates a significant amount of internal cables and connectors, and the laminar design of the 1336F-B030-AE-EN-HAS2-L6 drive bus decreases its internal inductance and snubber losses.

The range of acceptable input voltage for the Allen-Bradley 1336F-B030-AE-EN-HAS2-L6 1336 PLUS II series motor control drive is from 380 to 480 Volts AC. The operators can connect the drive to 3-phase or single-phase input voltage sources. However, it must be noted that single-phase input leads to 50% output derating. The IP 20-rated enclosure of the 1336F-B030-AE-EN-HAS2-L6 drive provides the drive with limited protection against dust and debris. The enclosure does not provide any protection against fluids or chemicals. The 1336F-B030-AE-EN-HAS2-L6 drive is EMC-compatible. It comes with an HMI module and a control interface module. The control interface on the 1336F-B030-AE-EN-HAS2-L6 drive operates at 115 Volts AC. The HMI supports a digital potentiometer and it is a programmer/controller HMI. The 1336F-B030-AE-EN-HAS2-L6 motor control  drive operates in English.