1336F-B030-AE-EN-L4

The Allen-Bradley 1336F-B030-AE-EN-L4 1336 PLUS II series motor control drive is an AC drive. Its maximum rated output power under all of the recommended operating conditions is 30 Horsepower. The recommended operating conditions include 3-phase AC input voltage, ambient temperatures between 0 and 40 degrees Celsius, and elevations between 0 and 3300 feet above sea level. Variations in these operating conditions can lead to drive output derating, and in extreme conditions, they can lead to drive failure. Therefore, all technical personnel working on the 1336F-B030-AE-EN-L4 drive should read and understand all of the drive’s instructions and specifications in the 1336 PLUS II manual and ensure that its operating conditions comply with those recommended by the manufacturer. The 1336F-B030-AE-EN-L4 motor control drive needs a power supply that supports 380 to 480 Volts AC 3-phase input voltage.

The Allen-Bradley 1336F-B030-AE-EN-L4 1336 PLUS II series motor control drive features one factory-fitted hardware module which is a control interface module that supports TTL contact. The drives can support optional hardware modules for communication, HMI, control interfaces, and I/O which the users can order and install. The drive is shipped in an EMC-compatible enclosure. EMC compatibility means that the drive does not emit any radio frequency or electromagnetic interference that could negatively affect other devices that are installed nearby. The drive enclosure is a NEMA Type 1 enclosure with an IP 20 protection rating. The 1336F-B030-AE-EN-L4 drive comes with an English language module but it can support other language modules too. The drive operators can use a suitable circuit breaker or fuse to protect the drive input from high currents if necessary. The operators can also install an isolation transformer to protect the drive input if necessary. The drive output connects to a compatible motor’s input. The operators can also install a suitable motor circuit protector for motor protection.