Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B030-AN-EN-HAS1-L4E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B030-AN-EN-HAS1-L4E

|
Need a Specific Revision?

The Allen-Bradley 1336F-B030-AN-EN-HAS1-L4E 1336 PLUS II drive is an AC-powered motor control drive. It features a factory-installed HMI module for programming and controlling it. The 1336F-B030-AN-EN-HAS1-L4E drive operates at 380 to 480 Volts AC of input voltage and at 30 Horsepower of nominal output power.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B030-AN-EN-HAS1-L4E

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B030-AN-EN-HAS1-L4E
Weight45.00 lbs (20.41 kg)
Input Voltage380 to 480 Volts AC
Output Power30 Horsepower
Mounting OrientationVertical
HMIProgrammer/Controller with Analog Potentiometer
EnclosureOpen
Protection RatingIP 00
Frame SizeSize B
HeatsinkYes
Working Temperature0 to 50 degrees Celsius
Request a Repair

The Allen-Bradley 1336F-B030-AN-EN-HAS1-L4E drive is an industrial motor control drive from the 1336 PLUS II series. It is designed for direct connection to AC power supply systems in safe environments. The drive’s operating voltage range is from 380 to 480 Volts AC. The drive supports input voltage protection from overvoltage and undervoltage situations. The overvoltage shut-off threshold is 570 Volts AC and the undervoltage shut-off threshold is 280 Volts AC. The DC bus on the 1336F-B030-AN-EN-HAS1-L4E carries a nominal voltage rating of 810 Volts DC. The overvoltage shut-off threshold for the DC bus is 810 Volts DC and the undervoltage shut-off threshold for the DC bus is 400 Volts DC. To prevent electric shock during maintenance, the technicians working on the drive should shut off the drive and allow sufficient time for the DC bus capacitors to discharge fully before working on the drive. The technicians can check the value of the DC bus voltage with a voltmeter and the test points for checking the DC bus voltage are available on Terminal Block 1. Before beginning maintenance activities, the technicians must ensure that the DC bus voltage rating is 0.0 Volts.

The Allen-Bradley 1336F-B030-AN-EN-HAS1-L4E 1336 PLUS II series motor control drive delivers 30 Horsepower of nominal output power in optimal operating circumstances. The drive enclosure is open with an IP 00 rating. The 1336F-B030-AN-EN-HAS1-L4E motor control drive features 2 factory-installed interface modules: an HMI module and a control interface module. The HMI module includes an analog potentiometer and it can be used to program or control the drive. The control interface module supports encoder feedback and a TTL contact feature. The drive can also support an optional communication module and 1 or 2 optional analog interface modules. The frame size of the 1336F-B030-AN-EN-HAS1-L4E motor control drive is Size B. The drive’s approximate weight and dimensions are 22.7 kilograms and 18.75 x 10.8 x 3.68 inches, respectively.