1336F-B030-AN-EN-HAS1-L5

The 1336F-B030-AN-EN-HAS1-L5 adjustable frequency drive is a highly advanced AC-powered motor control drive. It was developed by Allen-Bradley in the 1336 PLUS II series. The drive is widely used for motor speed control functions in commercial applications. The 1336F-B030-AN-EN-HAS1-L5 drive’s input accepts AC voltage ratings between 380 and 480 Volts AC (3-phase). The drive supports integrated input undervoltage and overvoltage protection. It is set to trip at 570 Volts AC for overvoltage and 280 Volts AC for undervoltage. The 1336F-B030-AN-EN-HAS1-L5 drive also supports integrated undervoltage and overvoltage protection for the DC bus. It is set to trip at 810 Volts DC for Bus overvoltage and 400 Volts DC for bus undervoltage. Under normal operating conditions, the nominal DC bus voltage rating is 648 Volts DC. All of the 1336F-B030-AN-EN-HAS1-L5 drive’s functions are controlled by an on-board microprocessor.

The heat sink thermistor on the Allen-Bradley 1336F-B030-AN-EN-HAS1-L5 1336 PLUS II series motor control drive is also monitored by this microprocessor. The total amount of heat generated during operation equals 961 Watts. The nominal rated output value of 30 Horsepower is valid as long as all of the operating conditions comply with the Allen-Bradley specifications. The drive output will derate or the drive may even become damaged if its ambient temperature is outside the range of 0 to 50 degrees Celsius, or if the elevation it is installed at is more than 1000 meters above sea level. All of the drive specifications documented in the 1336 PLUS II manual are valid for 4 kilohertz of PWM frequency. The 1336F-B030-AN-EN-HAS1-L5 drive supports PWM frequencies ranging from 2 to 8 kilohertz. The 1336F-B030-AN-EN-HAS1-L5 AC drive comes in an open enclosure and the protection class rating of the drive is IP 00. The programmer/controller HMI module on the 1336F-B030-AN-EN-HAS1-L5 drive features an analog potentiometer. The control interface on the drive is rated for 24 Volts AC/DC.