1336F-B030-AN-EN-HASP-L4

The 1336F-B030-AN-EN-HASP-L4 motor control drive is an adjustable frequency AC drive for controlling induction motors that is available from the Allen-Bradley 1336 PLUS II series. This 1336 PLUS II series drive is designed specifically for motors in industrial fan and pump control applications. The 1336F-B030-AN-EN-HASP-L4 drive includes a TTL contact control interface and an HMI. The drive has Class 10 speed-sensitive electronic overload protection and it can notify the operators about overloads through the HMI module to minimize the chances of an overload state causing motor damage. The drive’s ability to handle induction motors with either constant or variable torque and to accommodate various applications and loads makes it an extremely versatile motor control solution. This Allen-Bradley drive has an open enclosure with an IP 00 ingress protection rating that can only be used indoors, and it is recommended to install the drive in a control cabinet for protection when it is operating in harsh indoor environments.

The Allen-Bradley 1336 PLUS II series 1336F-B030-AN-EN-HASP-L4 adjustable frequency  motor control drive is capable of operating on an AC supply voltage range of 380 to 480 Volts AC (3-phase) with a +/-10% acceptable tolerance range to accommodate for changes in the incoming mains power supply. The 1336F-B030-AN-EN-HASP-L4 drive operates with a mains power supply frequency range of 50 to 60 Hertz and with a frequency tolerance range of 48 to 62 Hertz. The drive supports a frequency output range of 0 to 400 Hertz. The 1336F-B030-AN-EN-HASP-L4 drive can tolerate a 115% intermittent overload for 1 minute with variable torque loads and it can tolerate a 150% intermittent overload for 1 minute with constant torque loads. The 1336F-B030-AN-EN-HASP-L4 motor control drive’s HMI is a programmer-only type of HMI.