1336F-B030-AN-EN-HCS2

The Allen-Bradley 1336F-B030-AN-EN-HCS2 motor control drive is a microprocessor-based AC-powered drive from the 1336 PLUS II series. It includes a heatsink for efficient heat dissipation. The rated nominal output power is 30 Horsepower and the total heat dissipation rating is 961 Watts. The 1336F-B030-AN-EN-HCS2 drive’s open enclosure is IP 00 rated. This means that the users must install the drive in a cabinet if the application is in an outdoor location or in an indoor location that contains high levels of dust, dirt, or moisture. The working temperature range for the 1336F-B030-AN-EN-HCS2 drive is from 0 to 50 degrees Celsius without an enclosure because its open design dissipates heat efficiently. The use of the drive outside this temperature range will lead to output derating, and in extreme cases, it can lead to drive failure or damage. The 1336F-B030-AN-EN-HCS2 motor control drive can be installed at altitudes of 0 to 1000 meters above sea level.

The Allen-Bradley 1336F-B030-AN-EN-HCS2 1336 PLUS II series motor control drive is designed to operate at an input voltage range from 380 to 480 Volts AC. Since the frame size of the drive is Size B, it accepts single-phase and 3-phase AC input voltage, but it only supports single-phase input with significant output derating. The HMI on the 1336F-B030-AN-EN-HCS2 drive is a programmer/controller HMI with a digital potentiometer. The HMI also supports an application data-uploading and downloading capability. The HMI’s display screen can be used for monitoring drive parameters. The 1336F-B030-AN-EN-HCS2 drive is designed so that it has a simple and efficient startup process. Its self-prompting assisted startup method is especially easy to use. It also has a slightly more complex startup process that supports full parameter access. For ease of access, the 1336F-B030-AN-EN-HCS2 drive’s programmable parameters are divided into logical groups.