1336F-B030-AN-EN-HCS2-L5

The Allen-Bradley 1336F-B030-AN-EN-HCS2-L5 1336 PLUS II drive is a digital motor control drive. It is used for induction motor control in commercial applications. The drive delivers 30 Horsepower of nominal output power. The output derates if the ambient temperature exceeds 50 degrees Celsius or if the elevation of the operating environment exceeds 1000 meters. The output also falls to 50% of the maximum rated output if the 1336F-B030-AN-EN-HCS2-L5 drive is connected to a single-phase AC power supply. The 3-phase input voltage range for drive operation at full output is 380 to 480 Volts AC. The drive comes in an open enclosure that belongs to the IP 00 protection class. This means that the drive is not protected from liquids or solid particles. If it needs a higher degree of environmental protection, the 1336F-B030-AN-EN-HCS2-L5 motor control drive can be mounted inside an industrial cabinet or a stronger enclosure.

Two optional hardware modules are installed on the Allen-Bradley 1336F-B030-AN-EN-HCS2-L5 1336 PLUS II motor control drive, an HMI module and a control interface module. The HMI module supports easy drive monitoring and programming. It also features a digital potentiometer and it can be used for uploading and downloading application data. The control interface module operates at 24 Volts AC/DC. The 1336F-B030-AN-EN-HCS2-L5 drive’s corresponding user manual is printed in English and the drive operates in English. Errors in wiring and other types of installation errors can severely affect the drive’s performance. Therefore, to ensure optimal drive performance and prevent user injury, Allen Bradley recommends that only trained technical personnel be allowed to install or maintain the drive. The 1336F-B030-AN-EN-HCS2-L5 drive is an ESD-sensitive device. Therefore, when the drive is being installed or maintained, all of the required or recommended ESD precautions must be followed.