Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B030-AN-EN-HCS2-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B030-AN-EN-HCS2-L6

|
Need a Specific Revision?

The Allen-Bradley 1336F-B030-AN-EN-HCS2-L6 motor control drive is an AC-powered 1336 PLUS II series drive. It features an HMI module with a digital potentiometer. The 1336F-B030-AN-EN-HCS2-L6 drive’s nominal output power rating is 30 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B030-AN-EN-HCS2-L6

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B030-AN-EN-HCS2-L6
Weight45.00 lbs (20.41 kg)
HMIProgrammer/Controller HMI with Digital Potentiometer and Upload/Download Capability
Control Interface115 Volts AC
Input Voltage380 to 480 Volts AC
Output Power30 Horsepower
Enclosure TypeOpen
Protection RatingIP 00
Mounting OrientationVertical
HeatsinkYes
Frame SizeB
Request a Repair

The Allen-Bradley 1336F-B030-AN-EN-HCS2-L6 1336 PLUS II series motor control drive is an industrial motor control drive that operates with 30 Horsepower of nominal output power. It can be used to control compatible motors that are rated for up to 30 Horsepower. The 1336F-B030-AN-EN-HCS2-L6 drive is designed for direct connection to an AC power supply in safe environments. Installing an isolation transformer on the drive is recommended if the AC power supply experiences frequent surges, spikes, outages, or other types of anomalies. Installing an input fuse or input circuit breaker is also recommended to protect the drive input from short circuits. The 1336F-B030-AN-EN-HCS2-L6 is designed to operate at 380 to 480 Volts AC input voltage. The users can connect this drive to either single-phase or 3-phase AC power supplies. However, the maximum rated output power is only available if the 1336F-B030-AN-EN-HCS2-L6 motor control drive is connected to a 3-phase AC power supply.

The Allen-Bradley 1336F-B030-AN-EN-HCS2-L6 1336 PLUS II series motor control drive has a control interface module that operates at 115 Volts AC. It also has an HMI module that can be used for programming and for controlling the drive. The HMI module also includes a digital potentiometer. The IP 00 rated open enclosure on the drive is not suitable for outdoor use. The operating temperature range of the drive is 0 to 50 degrees Celsius and the drive can operate at an elevation of up to 1000 meters above sea level without derating. The 1336F-B030-AN-EN-HCS2-L6 drive only operates in English. A heatsink is connected to the drive for heat dissipation and the users can mount the drive with the heatsink either outside or inside the cabinet when the drive is mounted in a cabinet for extra environmental protection. The DC bus on the drive carries high voltages, and the bus’s nominal voltage rating is 648 Volts DC. When the drive needs maintenance, the DC bus capacitors must be completely discharged before work is begun to prevent electric shock. The 1336F-B030-AN-EN-HCS2-L6 drive is a CE-certified drive. It is also UL listed.