Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B030-AN-EN-HCS2-L6E

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B030-AN-EN-HCS2-L6E

|
Need a Specific Revision?

The 1336F-B030-AN-EN-HCS2-L6E drive is an Allen-Bradley 1336 PLUS II series motor control drive. Its nominal rated output power is 30 Horsepower. The 1336F-B030-AN-EN-HCS2-L6E drive’s enclosure is open.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B030-AN-EN-HCS2-L6E

ManufacturerAllen Bradley
Product typeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B030-AN-EN-HCS2-L6E
Weight45.00 lbs (20.41 kg)
Input Voltage380 to 480 Volts AC
Output Power30 Horsepower
EnclosureOpen
HMIProgrammer/Controller with Digital Potentiometer and Upload/Download Capability
Protection RatingIP 00
Mounting OrientationVertical
Frame SizeB
LanguageEnglish
Output Frequency0 to 400 Hertz
Request a Repair

The 1336F-B030-AN-EN-HCS2-L6E motor control drive is an industrial AC-powered drive. It is manufactured by Allen-Bradley in the 1336 PLUS II drive series. The drive operates with AC input voltage. The drive’s operating voltage range is from 380 to 480 Volts AC. This drive supports 3-phase and 1-phase AC input voltage (though it only supports its full output ratings with 3-phase voltage) and the operators can connect it directly to the AC mains in safe environments. Depending on the characteristics of the AC power supply, optional protection devices can be used to protect the input side of the drive. To protect the 1336F-B030-AN-EN-HCS2-L6E drive from voltage fluctuations and spikes, an optional isolation transformer can be used. To protect the drive input from short-circuits, either a fuse or circuit breaker can be used. The 1336F-B030-AN-EN-HCS2-L6E drive also supports several integrated protection mechanisms. It is designed to trip or shut off to protect itself from overvoltage if the input voltage rises to 570 Volts AC.

The Allen-Bradley 1336F-B030-AN-EN-HCS2-L6E 1336 PLUS II series motor control drive is also set to shut off to protect itself from undervoltage if the input voltage falls to 280 Volts AC. The drive can also trip to protect itself if the DC bus voltage exceeds or falls below predefined trip threshold levels. The DC bus undervoltage shut-off threshold is 400 Volts DC and the DC bus overvoltage shut-off threshold is 810 Volts DC. The nominal output power rating of the 1336F-B030-AN-EN-HCS2-L6E drive is 30 Horsepower. The drive enclosure is open and the drive cools itself via natural convection cooling. The protection rating of the 1336F-B030-AN-EN-HCS2-L6E drive’s enclosure is IP 00. The control interface on the drive operates at 115 Volts AC and it supports encoder feedback. The HMI module on the drive is a programmer/controller HMI with a digital potentiometer and the ability to upload and download data. Only trained technical personnel should install the 1336F-B030-AN-EN-HCS2-L6E drive.