Designed by Allen-Bradley, the 1336F-B030-AN-EN-L6 drive is a 1336F Plus II drive features a nominal Horsepower rating of 30 Horsepower. The 1336F-B030-AN-EN-L6 drive features a power voltage range of 380 to 480 Volts AC and it comes with the IP 00 open enclosure. The English version Allen-Bradley 1336F-B030-AN-EN-L6 1336F Plus drive features the 115 Volts AC control interface and it comes with a rated efficiency of 97.5% at the drive’s rated current and nominal line voltage. The 1336F-B030-AN-EN-L6 drive features a voltage tolerance of -10% minimum and +10% maximum. The drive also features a frequency tolerance of 48 to 62 Hertz. Featuring the sensorless vector control, the 1336F-B030-AN-EN-L6 drive offers a programmable fast flux-up mode that is designed to enhance the acceleration of large motors.

The 1336F-B030-AN-EN-L6 drive features the selectable Volts per Hertz mode. When selected, the unit provides full functionality with different operating modes that include the start boost, the run boost, boost slope, and the full custom Volts per hertz operating mode. The 1336F-B030-AN-EN-L6 drive is designed to ensure out-of-the-box performance to ensure enhanced performance that is gained through the programming of the setup parameters with the actual motor nameplate values. The drive also features the PI control with the single process feedback device for adjusting the drive output according to the feedback requirements. The 1336F-B030-AN-EN-L6 drive also comes with the flying start capability for the applications that require the ability to pick up a spinning load. Through the flying start feature, the drive can easily run at the respective speed and in the commanded direction of the load that it is handling.