Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AA-EN-GM1-L5

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AA-EN-GM1-L5

|
Need a Specific Revision?

The Allen-Bradley 1336F-B040-AA-EN-GM1-L5 motor control drive is an AC-powered 1336 PLUS II series drive. Its input voltage rating is 380 to 480 Volts AC. The communication module on the 1336F-B040-AA-EN-GM1-L5 drive supports single-point Remote I/O communication.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AA-EN-GM1-L5

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AA-EN-GM1-L5
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power40 Horsepower
Mounting OrientationVertical
EnclosureNEMA Type 1
Protection RatingIP 20
HMINone
Altitude0 to 1000 Meters
Temperature0 to 40 degrees Celsius
CommunicationSingle-Point Remote I/O
Request a Repair

The 1336F-B040-AA-EN-GM1-L5 drive is an Allen-Bradley AC-powered motor control drive from the 1336 PLUS II series. Its frame size is Size C and it only supports 3-phase AC input. The acceptable range of input voltage for the drive is from 380 to 480 Volts AC. The acceptable range of line frequencies is 47 to 63 Hertz. The nominal output power rating of the 1336F-B040-AA-EN-GM1-L5 drive is 40 Horsepower. The drive can sustain 150% of the rated output for 1 minute in the constant torque mode. The drive can sustain 115% of the rated output for 1 minute in the variable torque mode. The 1336F-B040-AA-EN-GM1-L5 drive features 2 pre-installed modules which are a communication module and a control interface module. The communication module features a single-point Remote I/O interface for Remote I/O communication.

The control interface module on the Allen-Bradley 1336F-B040-AA-EN-GM1-L5 1336 PLUS II series motor control drive operates at 24 Volts DC or 24 Volts AC. The drive comes in a NEMA Type 1 enclosure and its protection rating is IP 20. This means that the drive enclosure provides limited protection against solid particles. However, the drive enclosure provides no protection against liquids. The operators must install the 1336F-B040-AA-EN-GM1-L5 drive in a cabinet for additional protection in harsh environments. The drive dissipates heat via natural convection-cooling. This cooling method requires smooth airflow around the drive and adequate separation from other devices to promote airflow. The minimum required spacing between the 1336F-B040-AA-EN-GM1-L5 drive and other horizontally adjacent devices is 4 inches. The minimum required spacing between the 1336F-B040-AA-EN-GM1-L5 drive and other vertically adjacent devices is 6 inches. The 1336F-B040-AA-EN-GM1-L5 drive operates in English.