Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AA-EN-GM1-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AA-EN-GM1-L6

|
Need a Specific Revision?

The Allen-Bradley 1336F-B040-AA-EN-GM1-L6 1336 PLUS II series drive is an AC-powered motor control drive. Its nominal output rating is 40 Horsepower. The 1336F-B040-AA-EN-GM1-L6 drive features a communication module with a single Remote I/O channel.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AA-EN-GM1-L6

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AA-EN-GM1-L6
Weight85.00 lbs (38.56 kg)
Mounting OrientationVertical
HMINone
EnclosureNEMA Type 1
Protection RatingIP 20
CommunicationSingle-Point Remote I/O
Working Temperature0 to 40 degrees Celsius
Altitude0 to 1000 Meters
HeatsinkYes
Control Interface115 Volts AC
Request a Repair

The Allen-Bradley 1336F-B040-AA-EN-GM1-L6 motor control drive is an AC-powered industrial drive. It is part of the Allen-Bradley 1336 PLUS II product line. Drives from this product line have a slot-based architecture that makes it easy for them to be customized to meet different application requirements. The 1336F-B040-AA-EN-GM1-L6 drive comes with one pre-installed control interface module. This control interface provides a way of interfacing many commands and signals to the drive through contact closures. The control interface on the 1336F-B040-AA-EN-GM1-L6 drive is rated for 115 Volts AC voltage, and it can be programmed to meet the needs of specific systems and applications. During the installation of the control interface module in the 1336F-B040-AA-EN-GM1-L6, the jumpers at pins 3/4 and 17/18 of J2 on the main control PCB must be removed and the proper mode must be selected.

The Allen-Bradley 1336F-B040-AA-EN-GM1-L6 1336 PLUS II series motor control drive also features a communication module with a single-point Remote I/O communication interface. The 1336F-B040-AA-EN-GM1-L6 drive has an IP 20 rated NEMA Type 1 enclosure for protection. The drive’s frame size is Size C. Its enclosure is designed to be mounted vertically through 4 screw holes. Each screw hole has a 19-millimeter diameter. The drive’s approximate width is 11.88 inches, its approximate height is 27.6 inches, and its approximate depth is 3.68 inches. The input voltage rating of the 1336F-B040-AA-EN-GM1-L6 drive is 380 to 480 Volts AC. Under specified operating conditions, the 1336F-B040-AA-EN-GM1-L6 drive is set to deliver 40 Horsepower of nominal output. The drive cools via natural convection cooling and temperature of the surrounding air should always be between 0 and 40 degrees Celsius to prevent overheating.