1336F-B040-AA-EN-GM5-L6

The Allen-Bradley 1336F-B040-AA-EN-GM5-L6 drive is an industrial AC-powered motor control drive. It belongs to the 1336 PLUS II series of modular Allen-Bradley drives that support a wide range of custom options. A DeviceNet module is installed in the slot on the 1336F-B040-AA-EN-GM5-L6 drive that is designed for hosting communication modules. Other options for communication with other devices include Enhanced DeviceNet communication, serial (RS-232) communication, and single-point Remote I/O communication. A control interface module rated at 115 Volts AC is installed in the slot that supports control interface modules. Other control interface module options include encoder feedback, 24 Volts AC/DC, and TTL contact control interfaces. The 1336F-B040-AA-EN-GM5-L6 drive output is rated for 40 Horsepower of nominal output. The drive’s input voltage rating is 380 to 480 Volts AC.

Because the Allen-Bradley 1336F-B040-AA-EN-GM5-L6 1336 PLUS II series motor control drive has a Size C frame, it only supports 3-phase AC input voltage. The maximum recommended temperature limit for drive operation is 40 degrees Celsius. The maximum recommended altitude limit for drive operation is 1000 meters. The output of the drive derates if it is used at a temperature or altitude higher than the recommended limits. The 1336F-B040-AA-EN-GM5-L6 drive is available in a NEMA enclosure with an IP 20 protection rating. The drive measures approximately 27.6 x 11.8 x 3.6 inches. The total amount of heat dissipated by the 1336F-B040-AA-EN-GM5-L6 drive during operation is 1108 Watts. It uses natural convection cooling which requires smooth airflow for proper heat dissipation. Allen-Bradley recommends 6 inches of minimum horizontal spacing and 4 inches of minimum vertical spacing. Allen-Bradley also recommends that only trained technicians install the 1336F-B040-AA-EN-GM5-L6 drive.