1336F-B040-AA-EN-GM6-L6

The Allen-Bradley 1336F-B040-AA-EN-GM6-L6 motor control drive is a digital AC-powered motor control drive from the 1336 PLUS II drive series. It is a microprocessor-based motor control drive that supports multiple features. The 1336F-B040-AA-EN-GM6-L6 drive also supports various optional hardware modules which can expand its features and capabilities. Two optional hardware modules are pre-installed on the 1336F-B040-AA-EN-GM6-L6 motor control drive. These 2 optional modules are an enhanced DeviceNet communication module and a control interface module that is rated at 115 Volts AC.

The input voltage rating of the Allen-Bradley 1336F-B040-AA-EN-GM6-L6 1336 PLUS II series motor control drive is from 380 to 480 Volts AC. The nominal output power rating of the drive is 40 Horsepower. To operate steadily at this output rating, the drive needs to operate under a set of manufacturer-specified ambient conditions. These conditions include 0 to 3300 feet of elevation above sea level and an ambient temperature range of 0 to 40 degrees Celsius. The cooling method employed by the 1336F-B040-AA-EN-GM6-L6 drive is natural convection-cooling. This cooling method relies on flow of ambient air around the drive while it operates. Good heat dissipation requires the absence of any objects near the drive that can obstruct airflow. To ensure smooth airflow, Allen-Bradley recommends providing a minimum of 6 inches of horizontal airflow space and 4 inches of vertical airflow space between the 1336F-B040-AA-EN-GM6-L6 drive and adjacent devices. The enclosure of the drive is IP 20-rated and it is a NEMA Type 1 enclosure. Only trained personnel should handle, install, and service the 1336F-B040-AA-EN-GM6-L6 drive.