1336F-B040-AA-EN-GMS1

The 1336F-B040-AA-EN-GMS1 motor control drive is an Allen-Bradley 1336 PLUS II series adjustable frequency drive for industrial motor control applications. It provides low-cost adjustable frequency control to AC induction motors, resulting in lower power consumption and increased productivity in the system that it is used in. Its innovative sensorless vector control capability provides a speed range of 120:1, allowing it to handle even the most demanding motor control applications. Additionally, the 1336F-B040-AA-EN-GMS1 drive supports up to 150% overload capacity for 60 seconds when it is running in constant torque applications. Its built-in electronic overload protection mechanism protects motors against overloads with accuracy and reliability. The drive supports Remote I/O network communication. It supports selectable motor control modes and an auto-tuning feature. The carrier frequency of the 1336F-B040-AA-EN-GMS1 drive is adjustable and can be set anywhere between 2 and 6 kilohertz.

The Allen-Bradley 1336F-B040-AA-EN-GMS1 1336 PLUS II series adjustable frequency motor control drive is built specifically for controlling 3-phase AC induction motors. It comes with an IP 20 (NEMA Type 1) rated enclosure and it is designed for use in clean indoor environments. The 1336F-B040-AA-EN-GMS1 drive from the 1336 PLUS II series comes with a factory-installed Remote I/O to SCANport communication module with a snap-in cradle that makes it possible for the drive to communicate with other devices through the Remote I/O network. The communication module has a single Remote I/O channel with baud rates of 57.6, 115, or 230 kBaud. The 1336F-B040-AA-EN-GMS1 drive operates with a nominal Horsepower rating of 40 Horsepower at 380 to 480 Volts AC 3-phase input voltage. It has a continuous maximum output current of 60 Amps for constant torque load applications and 65 Amps for variable torque load applications.