1336F-B040-AA-EN-HAS2-L5

The Allen-Bradley 1336F-B040-AA-EN-HAS2-L5 1336 PLUS II series motor control drive is an adjustable frequency drive that utilizes a PWM control signal to control induction motors with maximum efficiency. It incorporates an advanced sensorless vector motor control algorithm to provide high-precision motor speed and torque control without the need for an encoder. In addition to sensorless vector motor control, the 1336F-B040-AA-EN-HAS2-L5 drive features a customizable Volts per Hertz control mode for simple motor control applications. This high-performance and energy-efficient motor controller is usually used to control 3-phase induction motors in a variety of applications. The 1336F-B040-AA-EN-HAS2-L5 drive can also be programmed and monitored directly through its factory-installed programmer/controller HMI module and controlled through the HMI or the 24 Volts AC/DC control interface.

The Allen-Bradley 1336F-B040-AA-EN-HAS2-L5 1336 PLUS II series motor control drive is protected against power surges and motor overloads. Additionally, messages for errors such as drive/motor overload, bus voltage status, and current limit errors can be displayed on the HMI screen, allowing the drive operators to take quick action to address the errors before they have a chance to do any significant damage to the drive. The 1336F-B040-AA-EN-HAS2-L5 drive requires a 3-phase AC power supply that supports a 380 to 480 Volts AC voltage range to operate, and it has a nominal motor Horsepower rating of 40 Horsepower (30 kilowatts). It has a frame size of Size C, its approximate dimensions are 11.88 inches by 27.6 inches by 8.86 inches, and it weighs approximately 38.6 kilograms during shipping. The 1336F-B040-AA-EN-HAS2-L5 drive should be mounted in a location that meets the manufacturer's recommended environmental conditions and which does not experience direct sunlight, extreme vibration, dust, fluids of any kind, or high humidity levels, or contain corrosive substances.