1336F-B040-AA-EN-HASP-L4

The 1336F-B040-AA-EN-HASP-L4 drive is an Allen-Bradley 1336 PLUS II series motor control drive with a factory-installed HMI module. The operators can use the programmer option on the drive’s HMI module to program the drive and its parameters. The operators can also install a different HMI module if they need an HMI that can do more than simply programming the drive. The drive also features a factory-installed control interface module. The control interface on this module is a TTL contact control interface. The 1336F-B040-AA-EN-HASP-L4 comes in a NEMA Type 1 enclosure. The protection class of the drive’s enclosure is IP 20. This means that the drive is protected from small amounts of debris. However, the drive is not protected from large amounts of debris and dust or from liquids. The operators can install the 1336F-B040-AA-EN-HASP-L4 drive inside a cabinet to increase its protection rating if necessary. The 1336F-B040-AA-EN-HASP-L4 drive operates in English only.

The Allen-Bradley 1336F-B040-AA-EN-HASP-L4 1336 PLUS II series motor control drive delivers 40 Horsepower of maximum output power with 380 to 480 Volts AC 3-phase input voltage. It delivers only 20 Horsepower of maximum output power with single-phase AC input voltage. In addition to 3-phase AC input voltage, the 1336F-B040-AA-EN-HASP-L4 drive also needs to be used in the manufacturer’s recommended ambient conditions to support its maximum output rating. The recommended operating temperature range for the drive is from 32 to 104 degrees Fahrenheit. Its operating altitude should not exceed 1000 meters (3300 feet) above sea level and its ambient relative humidity levels should be within the 5 to 95% range without condensation. This drive should not be used in any environment that contains corrosive or volatile gasses or vapors. The 1336F-B040-AA-EN-HASP-L4 drive can tolerate an operating shock rating of up to 15G for 11 milliseconds and it can tolerate 0.152 millimeters of operating vibration at 1G peak.