Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AA-EN-HCS1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AA-EN-HCS1

|
Need a Specific Revision?

The Allen-Bradley 1336F-B040-AA-EN-HCS1 1336 PLUS II series drive is an AC-powered motor control drive. Its rated output power is 40 Horsepower. The frame size of the 1336F-B040-AA-EN-HCS1 drive is Size C.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AA-EN-HCS1

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AA-EN-HCS1
Weight85.00 lbs (38.56 kg)
Input Type380 to 480 Volts AC
Output Power40 Horsepower
Mounting OrientationVertical
Frame SizeC
Operating Temperature0 to 40 degrees Celsius
HMIProgrammer/Controller HMI with Analog Potentiometer and Upload/Download Capability
EnclosureNEMA Type 1
Protection RatingIP20
HeatsinkYes
Request a Repair

The Allen-Bradley 1336F-B040-AA-EN-HCS1 1336 PLUS II series motor control drive is a variable frequency drive. It is called a variable frequency drive because its output frequency rating is variable. The range of output frequencies supported by the drive is from 0 to 400 Hertz. The drive output is designed to be connected to a motor input. The motor speed and other motor parameters are controlled by the drive’s output frequency. The output voltage of the 1336F-B040-AA-EN-HCS1 drive is also variable, and the output voltage range is from 0 Volts to the rated voltage. The frame size of the 1336F-B040-AA-EN-HCS1 drive is Size C. Allen-Bradley recommends installing the drive vertically. The drive’s enclosure is not waterproof or able to protect the drive from large amounts of dust. To improve upon the 1336F-B040-AA-EN-HCS1 motor control drive’s IP 20 enclosure protection rating, the operators can mount the drive inside a cabinet.

The Horsepower output rating of the Allen-Bradley 1336F-B040-AA-EN-HCS1 1336 PLUS II series motor control drive is 40 Horsepower under optimal operating conditions. These optimal conditions are as follows: 380 to 480 Volts AC input voltage (3-phase, at 50/60 Hertz), an ambient temperature range from 0 to 40 degrees Celsius, a non-condensing relative humidity range between 5 and 95%, and an elevation between 0 and 1000 meters above sea level. The drive is supplied with a HMI module. This module features an analog potentiometer, and it supports an upload/download capability for uploading and downloading application data. The drive HMI features an LCD screen and a keypad. The 1336F-B040-AA-EN-HCS1 drive supports multiple optional hardware modules in addition to its HMI. Depending on the application requirements, the operators can install one communication module, 2 analog I/O modules, and one control interface module on the 1336F-B040-AA-EN-HCS1 drive. To minimize risk of electric shock, the operators must discharge the DC bus capacitors on the drive completely prior to any maintenance activity.