Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AA-EN-HCS1-L4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AA-EN-HCS1-L4

|
Need a Specific Revision?

The Allen-Bradley 1336F-B040-AA-EN-HCS1-L4 motor control drive is an AC-powered drive from the 1336 PLUS II series. Its rated output power is 40 Horsepower. The 1336F-B040-AA-EN-HCS1-L4 drive is available in a NEMA Type 1 enclosure with an IP 20 rating.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AA-EN-HCS1-L4

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AA-EN-HCS1-L4
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power40 Horsepower
EnclosureNEMA Type 1
Protection RatingIP 20
HMIProgrammer/Controller HMI with Analog Potentiometer and Upload/Download Capability
Control InterfaceTTL Contact
HeatsinkYes
Altitude0 to 1000 Meters
Operating Temperature0 to 40 degrees Celsius
Request a Repair

The Allen-Bradley 1336F-B040-AA-EN-HCS1-L4 drive is a 1336 PLUS II series motor control drive. It is designed for 3-phase AC power supply systems. The frame size of the 1336F-B040-AA-EN-HCS1-L4 drive is Size C and it does not accept 1-phase AC input voltage. This drive supports direct connection to the AC power supply in safe operating conditions. If necessary, the operators can install protection devices at the input side of the 1336F-B040-AA-EN-HCS1-L4 drive for protection against high current or voltage anomalies. Installing an isolation transformer is recommended if the AC power supply experiences significant variations or transients during operation. Installing a fuse or circuit breaker is also recommended for input short-circuit protection. The AC input voltage range for the drive is from 380 to 480 Volts AC. The nominal Horsepower rating at the output of the 1336F-B040-AA-EN-HCS1-L4 motor control drive is 40 Horsepower.

The Allen-Bradley 1336F-B040-AA-EN-HCS1-L4 1336 PLUS II series motor control drive’s output rating will derate if the ambient temperature or the elevation of the installation site exceed the recommended limits. The minimum recommended ambient temperature for drive operation is 0 degrees Celsius. The maximum recommended ambient temperature for drive operation is 40 degrees Celsius. Additionally, the minimum recommended elevation for drive operation is 0 meters above sea level and the maximum recommended elevation for drive operation is 1000 meters above sea level. The minimum recommended relative humidity level is 5% and the maximum recommended relative humidity level is 95% without condensation. The 1336F-B040-AA-EN-HCS1-L4 drive comes in a NEMA Type 1 enclosure with an IP 20 rating. The drive’s HMI module is a programmer/controller HMI with an analog potentiometer. The drive HMI also supports an upload/download feature for uploading and downloading application data. The control interface module on the 1336F-B040-AA-EN-HCS1-L4 drive is a TTL contact control interface.