1336F-B040-AA-EN-LA3-L4

The 1336F-B040-AA-EN-LA3-L4 motor control drive is an Allen-Bradley 1336 PLUS II series motor control drive developed for controlling 3-phase motors in industrial and commercial applications. This drive is a microprocessor-based high-performance induction motor controller that comes with different control technologies that the users select. The 1336F-B040-AA-EN-LA3-L4 drive can control the speed or torque of the connected AC motor with Volts per Hertz control technology or sensorless vector control technology. This Allen-Bradley drive is engineered to provide smooth motor control and trouble-free motor operation, and to save energy and operate efficiently. The drive is capable of controlling constant as well as variable torque loads in a wide range of applications such as applications fans, blowers, mixers, and conveyors. The 1336F-B040-AA-EN-LA3-L4 drive has a SCANport communication port that hosts devices that can be used to inform the drive’s operators about fault conditions and to provide drive status updates, enabling the users to act quickly when faults occur to minimize drive and motor damage. The serial communications capabilities of the drive also make it easy for the drive to interface with other devices such as Allen-Bradley PLCs and SLCs.

The Allen-Bradley 1336F-B040-AA-EN-LA3-L4 1336 PLUS II series motor control drive comes in a small NEMA Type 1 enclosure with an IP 20 environmental protection rating and a Size C frame. The enclosure protects the drive from small amounts of dirt and dust but not from large amounts of dirt and dust or from liquids or chemicals. The drive requires a three-phase power supply to operate at its full output ratings. A 3-phase 380 to 480 Volts AC input voltage range with support for +/-10% fluctuation is required for the 1336F-B040-AA-EN-LA3-L4 drive to operate properly. Its nominal output power rating is 30 kilowatts or 40 Horsepower. The 1336F-B040-AA-EN-LA3-L4 drive has a standard displacement power factor of 0.95 and an efficiency rating of over 97% when it operates at the rated current and voltage values. The 1336F-B040-AA-EN-LA3-L4 motor control drive is equipped with a TTL contact type of control interface and with an analog interface that features 2 isolated and configurable outputs which can operate at 0 to 10 Volts or at 0 to 20 milliamps.