Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AE-EN-HAS2-L5

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AE-EN-HAS2-L5

|
Need a Specific Revision?

The 1336F-B040-AE-EN-HAS2-L5 motor control drive is available through the 1336 PLUS II series of drives that are manufactured by Allen-Bradley/Rockwell Automation. The drive operates on a 3-phase AC power source and it has a nominal output power rating of 30 kilowatts or 40 Horsepower. The 1336F-B040-AE-EN-HAS2-L5 drive includes an optional human-machine interface and a control interface that is rated at 24 Volts AC/DC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AE-EN-HAS2-L5

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-B040-AE-EN-HAS2-L5
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power30 kilowatts (40 Horsepower)
Enclosure TypeIP 20 (NEMA Type 1)/EMC
LanguageEnglish
Human Machine Interface (HMI)Programmer/Controller with Digital Pot
Communication OptionNone
Control Interface24 Volts AC/DC
Analog InterfaceNone
Operating Temperature0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)
Storage Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
CertificationsCE, CSA, UL
Request a Repair

The catalog number 1336F-B040-AE-EN-HAS2-L5 is the catalog number for an Allen-Bradley/Rockwell Automation 1336 PLUS II series motor control drive that supports sensorless vector control and microprocessor technology. The drive comes with several safety features and protective components that prevent drive malfunctioning if faults occur due to occasional power failures. The 1336F-B040-AE-EN-HAS2-L5 drive has an input voltage range of 380 to 480 Volts AC and it supports operation with low-inductance motors. It can be directly connected to a 3-phase power supply. The drive can handle a variety of fault conditions immediately due to its predictive maintenance capabilities. The 1336F-B040-AE-EN-HAS2-L5 drive can tolerate moderate levels of shock, vibration, and temperature changes, and it can operate at altitudes of up to 1000 meters above sea level without derating. In addition to that, the 1336F-B040-AE-EN-HAS2-L5 drive has a “run-on power-up” function that helps with restoring the drive operation after the power has been unexpectedly disconnected.

The Allen-Bradley/Rockwell Automation 1336F-B040-AE-EN-HAS2-L5 1336 PLUS II series motor control drive also has a traverse function that allows the programming of the output frequency so that it can be adjusted to the set frequency. The drive has a nominal output power rating of 30 kilowatts (40 Horsepower) and an IP 20 (NEMA Type 1)/EMC protective enclosure. Additionally, the 1336F-B040-AE-EN-HAS2-L5 drive features a human-machine interface with a digital potentiometer and a control interface that operates at 24 Volts AC/DC voltage. The human-machine interface supports programmer and controller operating modes. The 1336F-B040-AE-EN-HAS2-L5 drive has a special fault buffer that remembers the last 4 faults that occurred, and this helps to determine the causes of future faults in order to reduce damage from future faults as much as possible. The 1336F-B040-AE-EN-HAS2-L5 drive can operate and control different types of loads and it can be used to replace drives that are much bigger than it because of its advanced control features and efficient design.