Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AN-EN-GM1-HAS1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AN-EN-GM1-HAS1

|
Need a Specific Revision?

The Allen-Bradley 1336F-B040-AN-EN-GM1-HAS1 motor control drive is a 1336 PLUS II series adjustable frequency drive. Its input voltage rating is 380 to 480 Volts AC. The 1336F-B040-AN-EN-GM1-HAS1 drive is equipped with an HMI module with an analog potentiometer.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AN-EN-GM1-HAS1

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AN-EN-GM1-HAS1
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power40 Horsepower
EnclosureOpen
Protection RatingIP 00
LanguageEnglish
HMIProgrammer/Controller HMI with Analog Potentiometer
CommunicationSingle-Point Remote I/O
Maximum Operating Temperature50 degrees Celsius
Output Frequency0 to 400 Hertz
Request a Repair

The Allen-Bradley 1336F-B040-AN-EN-GM1-HAS1 1336 PLUS II series motor control drive is an adjustable frequency drive. It is rated for 40 Horsepower of nominal output power. The drive’s AC input voltage range is 380 to 480 Volts AC (3-phase). The drive can not be used with single-phase AC input. The enclosure of the 1336F-B040-AN-EN-GM1-HAS1 drive is open. The protection rating of the drive enclosure is IP 00. The drive is equipped with 2 pre-installed optional hardware modules. One of these modules is an HMI module and the other one is a communication module. The HMI module supports programmer and controller functions and an analog potentiometer. The communication module supports single-point Remote I/O communication through 1 port. Additional slots for optional hardware modules are available on the 1336F-B040-AN-EN-GM1-HAS1 drive, and the operators can install 1 or 2 analog I/O modules or a control interface module in these slots.

The Allen-Bradley 1336F-B040-AN-EN-GM1-HAS1 1336 PLUS II series motor control drive can only operate in English unless a language module for a different language is used to replace its English module. The users of the drive should follow all of the relevant safety precautions and operating instructions listed in the 1336F-B040-AN-EN-GM1-HAS1 drive’s manual to prevent equipment damage and user injury, and to ensure reliable drive performance. Additionally, only qualified and experienced technicians install and operate the drive to ensure that it is installed and operated properly. In addition, the drive users should follow all of the standard ESD precautions that will help to prevent damage to ESD-sensitive drive components. The DC bus on the 1336F-B040-AN-EN-GM1-HAS1 drive carries a significantly high level of voltage. Prior to any maintenance activity, the operators must switch off the drive and ensure that the bus capacitors are discharged fully before working on the drive. Failure to follow this precaution can lead to severe electric shock and even death.