1336F-B040-AN-EN-GM1-HAS2-L6

The Allen-Bradley 1336F-B040-AN-EN-GM1-HAS2-L6 1336 PLUS II series drive is an adjustable frequency type of motor control drive. It is available in an open enclosure. The open enclosure allows the drive to operate at higher temperatures than enclosed drives can. The maximum ambient temperature at which the 1336F-B040-AN-EN-GM1-HAS2-L6 drive can operate without derating is 50 degrees Celsius. In comparison, enclosed drives can operate without derating at up to only 40 degrees Celsius. However, the IP 00-rated open enclosure of the drive cannot protect it from dust and moisture in the operating environment. Therefore, the drive can not be used outdoors or in hazardous indoor locations unless it is installed in a cabinet for environmental protection. It is also recommended to install the drive in a cabinet even in safe indoor locations for additional protection. The input voltage range for the 1336F-B040-AN-EN-GM1-HAS2-L6 drive is 380 to 480 Volts AC (3-phase).

The nominal output power rating for the Allen-Bradley 1336F-B040-AN-EN-GM1-HAS2-L6 1336 PLUS II series motor control drive is 40 Horsepower. Therefore, it can be used with motors rated at up to 40 Horsepower. The modular drive architecture allows the users to install plug-in modules to match the drive to the needs of a specific application. The factory-installed plug-in modules on the 1336F-B040-AN-EN-GM1-HAS2-L6 drive include a single-point Remote I/O module for communication, an HMI, and a 115 Volts AC-rated control interface. The programmer feature on the HMI module supports easy drive programming. The HMI also features a digital potentiometer. The nameplate for the 1336F-B040-AN-EN-GM1-HAS2-L6 drive is mounted on the mounting plate of the control board. The drive’s installers must ensure that the drive is wired properly during installation to avoid system malfunctioning and only copper wires should be used.