Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AN-EN-HAS1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AN-EN-HAS1

|
Need a Specific Revision?

The Allen Bradley 1336F-B040-AN-EN-HAS1 is an AC Variable Frequency Drive designed to control motors with a power output of 30 kW (40 HP). It operates within a supply voltage range of 380 to 480 V AC for three-phase systems and utilizes an open-type enclosure rated at IP00. The unit provides a user-friendly handheld interface that features a snap-in controller with an analog potentiometer rated IP20.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AN-EN-HAS1

ManufacturerAllen Bradley
Product TypeAC Variable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AN-EN-HAS1
Weight85.00 lbs (38.56 kg)
Motor Power Rating30 kW (40 HP)
Supply Voltage380–480 V AC, 3-Phase
Enclosure RatingIP00 / Open
HIM (Keypad)Snap-in Programmer/Controller w/ Analog Pot, IP20 (NEMA 1)
Constant Torque CurrentInput 58 A, Output 60 A
Variable Torque CurrentInput 63 A, Output 65 A
Input Overvoltage Trip570 V AC
Input Undervoltage Trip280 V AC
DC Bus Overvoltage Trip810 V DC
DC Bus Undervoltage Trip400 V DC
Nominal DC Bus Voltage648 V DC
Frequency AccuracyDigital ±0.01% of set output frequency; Analog ±0.4% of max output frequency
Accel/Decel Times2 independent, 0–3600 s in 0.1 s steps
Intermittent OverloadCT: 150% rated, 1 min; VT: 115% rated, 1 min
Request a Repair

The 1336F-B040-AN-EN-HAS1 from Allen Bradley is engineered as an AC Variable Frequency Drive capable of handling a motor power rating of 30 kW or 40 HP. It operates effectively within a voltage range of 380 to 480 Volts AC in a three-phase setup. This drive features an open enclosure design with an IP00 rating, indicating it is intended for controlled environments where it may not encounter moisture or dust.

For operator interaction, the drive comes equipped with a snap-in programmer/controller that includes an analog potentiometer, offering an IP20 (NEMA 1) rating for that component. The control capabilities foster user-friendly access to drive configurations.

In terms of current ratings, the system allows for inputs of 58 Amps and outputs for constant torque at 60 Amps. When dealing with variable torque applications, the input is rated at 63 Amps and output at 65 Amps. This drive also features protective measures with input overvoltage trips set at 570 Volts AC and undervoltage trips at 280 Volts AC to prevent any system damage.

On the DC bus side, the device can handle an overvoltage trip of 810 Volts DC, while the undervoltage trip is rated at 400 Volts DC, maintaining a nominal bus voltage of 648 Volts DC. Frequency control is accurate, with digital settings expressing ±0.01% of the set output frequency, while analog settings show ±0.4% of the maximum output frequency.

Users can adjust acceleration and deceleration with two independent timers, capable of settings between 0 and 3600 seconds in 0.1-second increments. The intermittent overload capacity allows for a 150% rating for constant torque over one minute and a 115% rating for variable torque during the same timeframe. This flexibility makes the 1336F-B040-AN-EN-HAS1 drive a robust solution for varied motor control applications.