1336F-B040-AN-EN-HAS1-L4

The 1336F-B040-AN-EN-HAS1-L4 motor control drive is an Allen-Bradley 1336 PLUS II series adjustable frequency drive designed for controlling AC induction motors. It supports sensorless vector control technology. This drive operates with a 3-phase AC power supply, and its nominal Horsepower output rating is 40 Horsepower (30 kilowatts). The operating voltage range of the 1336F-B040-AN-EN-HAS1-L4 drive is 380 to 480 Volts AC. This Allen-Bradley drive operates with a default carrier frequency rating of 4 Kilohertz but its carrier frequency rating can be adjusted to anywhere from 2 to 6 Kilohertz. The 1336F-B040-AN-EN-HAS1-L4 drive has an input voltage tolerance range from -10% of the minimum voltage to +10% of the maximum voltage. It is an indoor-rated drive with an ingress protection rating of IP 00, and as such, it should not be used in environments with high levels of humidity, moisture, dust, or direct sunlight.

The Allen-Bradley 1336F-B040-AN-EN-HAS1-L4 1336 PLUS II series motor control drive can safely handle a 115% overload for 1 minute for applications with variable loads and it can safely handle a 150% overload for 1 minute for applications with constant loads. The 1336F-B040-AN-EN-HAS1-L4 drive can run at its rated load and switching frequency at ambient temperatures between 0 and 50 degrees Celsius and at non-condensing relative humidity levels of up to 95%. The drive comes with a standard Volts/Hertz motor control algorithm that is easy to customize and it supports independently adjustable motor acceleration and deceleration times from 0 to 3600 seconds each. Additionally, the 1336F-B040-AN-EN-HAS1-L4 drive features DC injection braking, a power loss ride-through feature, and a slip compensation feature. The 1336F-B040-AN-EN-HAS1-L4 drive also comes with a programmer/controller HMI with an analog speed potentiometer, and with a TTL contact type of control interface.