1336F-B040-AN-EN-HAS2-L4

The 1336F-B040-AN-EN-HAS2-L4 motor control drive from Allen-Bradley is designed to control 3-phase induction motors in a variety of industrial applications. It is a microprocessor-based 1336 PLUS II series adjustable frequency drive that utilizes pulse width modulation (PWM) technology and Isolated Gate Bipolar Transistor (IGBT) technology. The 1336F-B040-AN-EN-HAS2-L4 drive uses its sensorless vector control algorithm to control large and advanced motors and to dynamically determine a motor’s torque and speed in variable torque load applications. Additionally, this Allen-Bradley drive has a more standard control algorithm called the “Volts per Hertz” algorithm for controlling standard types of motors. The 1336F-B040-AN-EN-HAS2-L4 has a fundamental input power factor of 0.98. Its sensorless vector control technology provides over 250% starting torque for large motors and motor loads. This drive is rated to operate at 380 to 480 Volts AC 3-phase input voltage with +/- 10% fluctuation and 50 to 60 Hertz of operating frequency.

The Allen-Bradley 1336F-B040-AN-EN-HAS2-L4 1336 PLUS II series motor control drive is rated to run continuously at a full load without derating in an ambient temperature range from 0 to 50 degrees Celsius, at an altitude ranging from 0 to 3300 feet above sea level, and in a non-condensing relative humidity range from 5 to 95 percent. It can be used in constant torque applications and in variable torque applications. This adjustable frequency drive’s output frequency rating can be adjusted to anywhere between 0 and 400 Hertz, and its frequency tolerance range is from 48 to 62 Hertz. The 1336F-B040-AN-EN-HAS2-L4 motor control drive has an intermittent overload rating of 115% for variable torque applications and an intermittent overload rating of 150% for constant torque applications for 1 minute each. This drive comes with a TTL contact control interface and a programmer/controller HMI with a digital potentiometer.