1336F-B040-AN-EN-HAS2-L6

The Allen-Bradley 1336F-B040-AN-EN-HAS2-L6 motor control drive is an industrial AC-powered drive from the 1336 PLUS II series. It is a microprocessor-controlled drive that is designed for high-performance industrial motor control applications. The 1336F-B040-AN-EN-HAS2-L6 drive is typically used to control the speed and position of a compatible servo motor. A wide range of optional hardware modules are available including communication modules, HMI modules, and analog I/O modules. The 1336F-B040-AN-EN-HAS2-L6 drive features 2 factory-installed optional hardware modules. One of these is an HMI module with programmer features and a digital potentiometer. The other module on the 1336F-B040-AN-EN-HAS2-L6 drive is a control interface module. The control interface module operates at 115 Volts AC.

The Allen-Bradley 1336F-B040-AN-EN-HAS2-L6 1336 PLUS II series motor control drive’s enclosure is open and the ingress protection rating of the drive enclosure is IP 00. Because the drive is unprotected against dust and moisture, it must be mounted in a cabinet before it can be used outdoors. Cabinet mounting is also recommended even if the drive is used indoors in hazardous environments. The input voltage rating of the 1336F-B040-AN-EN-HAS2-L6 drive is from 380 to 480 Volts AC. Only 3-phase input voltage is supported for the frame size C drive. The 1336F-B040-AN-EN-HAS2-L6 drive delivers 40 Horsepower of nominal output power under optimal operating conditions. The maximum ambient temperature for safe drive use without derating is 50 degrees Celsius. Note that the internal drive temperature is much higher than the ambient temperature around the drive during operation. As a result, ambient temperatures higher than 50 degrees Celsius can lead to dangerously high internal temperatures, which can lead to drive malfunctioning and even drive failure.