1336F-B040-AN-EN-HASB-L4

The 1336F-B040-AN-EN-HASB-L4 1336 PLUS II motor control drive is an Allen-Bradley AC-powered drive. It is an adjustable frequency type of motor control drive. The frequency rating at the drive output varies from 0 to 400 Hertz. The 1336F-B040-AN-EN-HASB-L4 drive is not equipped with a factory-installed HMI module. Instead, a blank cover plate is provided with the drive to cover the opening in the front of the drive where an HMI module would normally be installed. Hazardous high-voltage drive components will be exposed and there is a risk of electric shock for the operators if this blank plate is not installed. The control interface installed on the 1336F-B040-AN-EN-HASB-L4 drive is a TTL contact control interface. In addition to the HMI slot, slots are available on the 1336F-B040-AN-EN-HASB-L4 drive for 2 I/O modules and a communication module. The operators can install the appropriate modules in these slots to customize the drive.

The Allen-Bradley 1336F-B040-AN-EN-HASB-L4 1336 PLUS II series motor control drive has an open enclosure that is designed for efficient convection cooling. Smooth airflow around the drive is essential for keeping the ambient temperature of the drive stable. The ambient operating temperature range for the 1336F-B040-AN-EN-HASB-L4 drive is from 0 to 50 degrees Celsius. The drive should be mounted vertically. Mounting holes on the enclosure make it easy to mount the drive securely in the correct position. The 1336F-B040-AN-EN-HASB-L4 drive operates at 380 to 480 Volts AC input voltage. The output power rating of the drive is 40 Horsepower. The output power derates if the ambient temperature goes above 50 degrees Celsius or if the drive is used at altitudes of more than 1000 meters above sea level. The non-condensing relative humidity in the 1336F-B040-AN-EN-HASB-L4 drive’s environment should always be at levels between 5 and 95%.