1336F-B040-AN-EN-HASB-L5

The 1336F-B040-AN-EN-HASB-L5 motor control drive is an industrial motor control drive from the Allen-Bradley 1336 PLUS II series. It is available in an open enclosure. The protection rating of the drive is IP 00. The maximum ambient operating temperature for the 1336F-B040-AN-EN-HASB-L5 drive is 122 degrees Fahrenheit. The minimum ambient operating temperature is 32 degrees Fahrenheit. The maximum operating elevation is 3300 feet above sea level. The minimum operating elevation is 0 feet above sea level. The relative humidity levels that the drive can operate at safely are between 5 and 95% in environments without condensation. The 1336F-B040-AN-EN-HASB-L5 drive must be protected from dust, water, and corrosive chemicals. The drive only works with 3-phase input voltage. The input voltage range is from 380 to 480 Volts AC. The permitted input voltage tolerance range is from -10% of the minimum input to +10% of the maximum input.

The nominal rated output power of the Allen-Bradley 1336F-B040-AN-EN-HASB-L5 1336 PLUS II series motor control drive is 40 Horsepower. A blank plate is provided with the controller, and its purpose is to cover the opening located on the front of the controller where an optional human-machine interface can be installed. The installation of this blank plate prevents unauthorized access to high-voltage drive components. The 1336F-B040-AN-EN-HASB-L5 drive’s blank plate can be replaced by a human-machine interface module that will expand its functionalities. The drive comes with a control interface module that operates at 24 Volts AC/DC. The start-up procedure for the 1336F-B040-AN-EN-HASB-L5 drive is simple. Two start-up methods can be used: a simple self-prompting procedure or a more complex procedure that utilizes the “program” mode.