1336F-B040-AN-EN-HASB-L6

The Allen-Bradley 1336F-B040-AN-EN-HASB-L6 1336 PLUS II series motor control drive is an adjustable frequency drive. Its full rated output power is 40 Horsepower. This output power rating is valid for 380 to 480 Volts AC 3-phase input voltage. The full rated output power also requires an ambient temperature range between 32 and 122 degrees Fahrenheit, and elevations between 0 and 3300 feet above sea level. The output power rating of the 1336F-B040-AN-EN-HASB-L6 drive will fall below 40 Horsepower if the drive is used at temperatures or elevations outside of those specified by the manufacturer. The 1336F-B040-AN-EN-HASB-L6 drive has an open enclosure with an IP 00 protection rating. The approximate enclosure dimensions are 27.6 x 11.88 x 3.68 inches. The approximate weight of the 1336F-B040-AN-EN-HASB-L6 motor control drive is 85 pounds.

The manual for the Allen-Bradley 1336F-B040-AN-EN-HASB-L6 1336 PLUS II series motor control drive is in English. The control interface module on the drive works at 115 Volts AC. The other slots for optional hardware modules on the drive are vacant, but the drive operators can install 1 optional communication module, 1 HMI module, and 2 analog I/O modules on the drive if necessary. The 1336F-B040-AN-EN-HASB-L6 drive is shipped with a blank plate to cover the opening in the front panel where an HMI module would normally be. Due to the presence of ESD-sensitive drive components, the operators must follow ESD precautions when handling, installing, or servicing the drive. Additionally, all technicians servicing the 1336F-B040-AN-EN-HASB-L6 drive must power it off and wait until the DC capacitors on the bus are fully discharged before beginning any maintenance work. Failure to allow the DC bus capacitors to discharge completely can lead to severe electric shock.