1336F-B040-AN-EN-HCS2-LA4-L4

The Allen-Bradley 1336F-B040-AN-EN-HCS2-LA4-L4 motor control drive is a digital drive from the 1336 PLUS II series. It has an input voltage range from 380 to 480 Volts AC and it uses 3-phase AC voltage. The users can connect the drive directly to the AC mains in safe environments. However, the users should install an isolation transformer if the AC mains regularly experiences spikes, outages, or transients. Although the 1336F-B040-AN-EN-HCS2-LA4-L4 drive supports many protection features, it does not support input short-circuit protection. However, the users can install fuses or circuit breakers at the drive input to protect it against input short-circuits. The exact specifications for the input fuses or circuit breakers that are compatible with the drive can be found in the drive’s user manual. The nominal output power rating of the 1336F-B040-AN-EN-HCS2-LA4-L4 drive is 40 Horsepower maximum. The drive can operate in a constant torque mode or a variable torque mode. When the drive is operating in the constant torque mode, the output torque rating is constant irrespective of the power output rating. When the 1336F-B040-AN-EN-HCS2-LA4-L4 drive is operating in the variable torque mode, the output torque varies with power output.

The Allen-Bradley 1336F-B040-AN-EN-HCS2-LA4-L4 1336 PLUS II series motor control drive’s default control mode is the sensorless vector control mode, but it also supports a selectable control mode called the “Volts/Hertz” mode which the users can select and program to meet a variety of specific motor requirements. This drive is available in an IP 00-rated open enclosure. The drive can operate safely at an ambient temperature rating of up to 50 degrees Celsius without derating. Drive operation at higher temperatures can cause malfunctioning and drive failure or component damage. The 1336F-B040-AN-EN-HCS2-LA4-L4 drive uses convection cooling and convection cooling requires adequate space around the drive for smooth airflow. The drive comes with a human-machine interface, an analog interface, and a control interface. The human-machine interface has a digital potentiometer and a data upload/download capability, the analog interface has a configurable input and a configurable output, and the control interface is a TTL contact interface. The 1336F-B040-AN-EN-HCS2-LA4-L4 motor control drive can be completely programmed and easily controlled through the human-machine interface.