Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B040-AN-EN-HCS2-LA4-L5

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B040-AN-EN-HCS2-LA4-L5

|
Need a Specific Revision?

The Allen-Bradley 1336F-B040-AN-EN-HCS2-LA4-L5 motor control drive is an AC-powered drive from the 1336 PLUS II series. It is equipped with an HMI module, an analog I/O interface module, and a control interface module. The nominal output rating of the 1336F-B040-AN-EN-HCS2-LA4-L5 drive is 40 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B040-AN-EN-HCS2-LA4-L5

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B040-AN-EN-HCS2-LA4-L5
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power40 Horsepower
Enclosure TypeOpen
Protection RatingIP 00
Mounting OrientationVertical
Frame SizeC
Output Frequency0 to 400 Hertz
Maximum Operating Temperature50 degrees Celsius
Maximum Operating Altitude1000 Meters
Request a Repair

The Allen-Bradley 1336F-B040-AN-EN-HCS2-LA4-L5 drive is a 1336 PLUS II series motor control drive. It delivers up to 40 Horsepower of nominal output power under ideal operating conditions. The 1336F-B040-AN-EN-HCS2-LA4-L5 drive output derates if its operating conditions deviate from those specified by the manufacturer. One of the specified conditions is an operating temperature range between 0 and 50 degrees Celsius, and another is an elevation range between 0 and 1000 meters above sea level. Additionally, it should be noted that the drive’s performance specifications that are listed in the drive manual are valid for 4 kilohertz of rated carrier frequency. The minimum carrier frequency that the 1336F-B040-AN-EN-HCS2-LA4-L5 drive can be configured to operate at is 2 kilohertz and the maximum carrier frequency that it can be configured to operate at is 6 kilohertz. Additionally, the minimum input voltage rating of the drive is 380 Volts AC and the maximum input voltage rating is 480 Volts AC. The 1336F-B040-AN-EN-HCS2-LA4-L5 drive’s enclosure is open.

The protection rating of the Allen-Bradley 1336F-B040-AN-EN-HCS2-LA4-L5 1336 PLUS II series motor control drive’s enclosure is IP 00. This enclosure is not dust-proof or waterproof. To protect the drive from dust and moisture, the users must mount it inside a control cabinet. The 1336F-B040-AN-EN-HCS2-LA4-L5 drive comes with a factory-installed HMI module with programmer/controller functions, a data-uploading and downloading function, and a digital speed potentiometer. It is also equipped with an analog I/O interface module. The analog I/O interface module supports 1 isolated and configurable input and 1 isolated and configurable output. The drive also has a control interface that operates at 24 Volts AC/DC. The 1336F-B040-AN-EN-HCS2-LA4-L5 drive’s cooling method is convection cooling and it needs to be installed in a system where it will have at least 6 inches of airflow space above and below it and at least 4 inches of airflow space either side of it.