1336F-B050-AA-EN-GM1-HAS2

The Allen-Bradley 1336F-B050-AA-EN-GM1-HAS2 drive is an AC-powered motor control drive from the 1336 PLUS II series. It is equipped with a HMI module that includes a potentiometer and that can act as a programmer or control device. The drive is also equipped with a single-point Remote I/O communication module. The drive enclosure is a NEMA Type 1 enclosure and its protection rating is IP 20. Allen-Bradley has designed the drive to be mounted in a control cabinet. The full output power rating of the 1336F-B050-AA-EN-GM1-HAS2 drive is 50 Horsepower. This output power rating is valid as long as the peak ambient temperature is less than or equal to 40 degrees Celsius, the minimum ambient temperature is 0 degrees Celsius, the minimum altitude is 0 meters above sea level, the maximum altitude is less than or equal to 1000 meters above sea level, and the carrier frequency rating is 4 kilohertz. The 1336F-B050-AA-EN-GM1-HAS2 drive supports carrier frequencies ranging from 2 to 8 kilohertz, but 4 kilohertz is the nominal rating.

The minimum AC input voltage rating that the Allen-Bradley 1336F-B050-AA-EN-GM1-HAS2 1336 PLUS II series motor control drive can accept is 380 Volts AC. The maximum AC input voltage rating that the drive can accept is 480 Volts AC. The 1336F-B050-AA-EN-GM1-HAS2 drive is designed for AC systems with symmetrical line voltages. Appropriate isolation is essential if either high phase to ground voltages are present or if there is a likelihood of variation in the ground potential. The operators can use surge suppression devices to protect the drive from lightning-induced voltages. The 1336F-B050-AA-EN-GM1-HAS2 drive features an English language module. Important safety instructions and precautions listed in the drive user manual and these instructions must be followed carefully by the users of the drive to prevent personal injury and equipment damage.