Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B050-AA-EN-GM1-HAS2-L4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B050-AA-EN-GM1-HAS2-L4

|
Need a Specific Revision?

The Allen-Bradley 1336F-B050-AA-EN-GM1-HAS2-L4 1336 PLUS II drive is a 50-Horsepower motor control drive. Its enclosure is IP 20-rated. The control interface on the 1336F-B050-AA-EN-GM1-HAS2-L4 drive is a TTL contact control interface.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B050-AA-EN-GM1-HAS2-L4

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B050-AA-EN-GM1-HAS2-L4
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power50 Horsepower
HMIProgrammer/Controller HMI with Digital Potentiometer
Mounting OrientationVertical
Control InterfaceTTL Contact
LanguageEnglish
Enclosure TypeNEMA Type 1
Protection RatingIP 20
Communication ModuleSingle-Point Remote I/O
Request a Repair

The Allen-Bradley 1336F-B050-AA-EN-GM1-HAS2-L4 motor control drive is a 50-Horsepower drive from the 1336 PLUS II series. It is designed by Allen-Bradley for commercial and industrial motor control applications. The 1336F-B050-AA-EN-GM1-HAS2-L4 drive enclosure is a NEMA Type 1 enclosure. Its protection category is IP 20. This enclosure can protect the drive from small amounts of dust and prevent the users from touching hazardous parts of the drive. However, since the drive is not safe from moisture, chemicals, or large amounts of dust, it should be mounted inside a control cabinet. The 1336F-B050-AA-EN-GM1-HAS2-L4 drive’s approximate weight is 85 pounds and its approximate dimensions are 27.6 x 11.8 x 3.6 inches. The drive is designed for convection cooling and it comes with a heatsink. The total amount of heat dissipated by the 1336F-B050-AA-EN-GM1-HAS2-L4 drive is 1110 Watts. The operating temperature range for the drive is from 0 to 40 degrees Celsius. The altitude range for the drive is from 0 to 1000 meters.

The Allen-Bradley 1336F-B050-AA-EN-GM1-HAS2-L4 1336 PLUS II series motor control drive is a drive that operators can connect to AC power supplies directly in safe environments. The input voltage range of the drive is 380 to 480 Volts AC. Using an isolation transformer is strongly recommended if there is a potential risk for high phase-to-ground voltages or if the ground potential may vary. Allen-Bradley also recommends the use of surge suppression devices to protect the 1336F-B050-AA-EN-GM1-HAS2-L4 drive from overvoltages caused by lightning. The 1336F-B050-AA-EN-GM1-HAS2-L4 drive is equipped with the following modules: an HMI module, a control interface module, and a communication module. The communication module supports Remote I/O communication through 1 channel. The HMI features a digital potentiometer. The control interface on the 1336F-B050-AA-EN-GM1-HAS2-L4 drive is a TTL contact type of control interface. If the drive is installed by skilled and experienced personnel, this can reduce the risk of installation errors.