Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B050-AA-EN-HAS2-L4-MX3

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B050-AA-EN-HAS2-L4-MX3

|
Need a Specific Revision?

The Allen-Bradley 1336F-B050-AA-EN-HAS2-L4-MX3 motor control drive is an AC-powered 1336 PLUS II series drive. Its circuit boards are conformally coated. The nominal output rating of the 1336F-B050-AA-EN-HAS2-L4-MX3 drive is 50 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B050-AA-EN-HAS2-L4-MX3

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product Line1336 PLUS II Drives
Part Number1336F-B050-AA-EN-HAS2-L4-MX3
Weight85.00 lbs (38.56 kg)
Input Voltage380 to 480 Volts AC
Output Power50 Horsepower
Enclosure TypeNEMA Type 1
Protection RatingIP 20
Conformal CoatYes
HMIProgrammer/Controller HMI with Digital Potentiometer
Cooling MethodNatural Convection
Mounting OrientationVertical
Maximum Operating Temperature40 degrees Celsius
Request a Repair

The 1336F-B050-AA-EN-HAS2-L4-MX3 drive is an Allen-Bradley 1336 PLUS II series motor control drive. Its nominal output power rating is 50 Horsepower. The drive is designed to operate with 3-phase AC input voltage. The operating voltage range of the drive is from 380 to 480 Volts AC. The 1336F-B050-AA-EN-HAS2-L4-MX3 drive’s circuit boards are covered with a conformal coat that provides them with protection against corrosion, liquids, dust, and extreme temperatures. Because the IP 20-rated drive enclosure does not provide the drive with full protection against dust and moisture, the drive should be installed inside a suitable cabinet in most environments to protect it from dust and moisture. The drive’s weight is approximately 85 pounds. The approximate height of the 1336F-B050-AA-EN-HAS2-L4-MX3 drive is 27 inches, the width of the drive is approximately 11.88 inches, and the depth of the drive is approximately 3.68 inches. The drive should be installed vertically.

There are 2 factory-installed optional interface modules on the Allen-Bradley 1336F-B050-AA-EN-HAS2-L4-MX3 1336 PLUS II series motor control drive: an HMI module and a control interface module. The HMI includes a programmer keypad and a digital potentiometer. The control interface is a TTL contact control interface with 9 inputs. The hardware current limit on the 1336F-B050-AA-EN-HAS2-L4-MX3 drive can be set to values ranging from 180 to 250% of the rated variable torque current. The 1336F-B050-AA-EN-HAS2-L4-MX3 motor control drive can sustain line transient voltages of up to 6000 Volts peak. The rated power ride-through time at a full load is 15 milliseconds and the typical value of the logic control ride-through time is 0.5 seconds.