1336F-B050-AA-EN-HASB-L5

The Allen-Bradley 1336F-B050-AA-EN-HASB-L5 1336 PLUS II series motor control drive is an industrial adjustable frequency drive. Its operators can use it to control the speed and torque of different types of compatible industrial motors. Because the drive’s full rated output is 50 Horsepower, the operators can use the drive with motors that are rated for up to 50 Horsepower. The 1336F-B050-AA-EN-HASB-L5 drive is designed for connection to a 3-phase AC mains which will supply it with its input power. Even though the users can connect the drive directly to the power supply in many systems, Allen-Bradley strongly recommends installing an isolation transformer for safety if the power supply experiences abnormally high voltages or variations in the ground potential. The 1336F-B050-AA-EN-HASB-L5 drive includes integrated surge suppression features for protection against occasional lightning-induced overvoltages. Allen-Bradley also recommends using fuses or circuit breakers to protect the drive from input short-circuits.

The operating voltage range of the Allen-Bradley 1336F-B050-AA-EN-HASB-L5 1336 PLUS II series motor control drive is 380 to 480 Volts AC. The enclosure of the 1336F-B050-AA-EN-HASB-L5 drive is a NEMA Type 1 enclosure. The enclosure has an IP 20 protection rating, and it provides protection against small amounts of dust and solid particles. However, even moderate quantities of solid particles and dust can still penetrate the drive’s enclosure and damage the drive, and the enclosure is not waterproof. Therefore, Allen-Bradley recommends mounting the drive inside a cabinet that is waterproof and that can protect it from significant amounts of dust and debris. The 1336F-B050-AA-EN-HASB-L5 drive has an opening in its front panel that usually hosts an HMI. However, the 1336F-B050-AA-EN-HASB-L5 drive does not come with an HMI. Instead, it has a blank plate that should be used to close this opening to prevent accidental access to the high-voltage drive components inside the opening. The 1336F-B050-AA-EN-HASB-L5 drive comes with a 24 Volts AC/DC-powered control interface.