1336F-B050-AA-EN-HASB-L6

The 1336F-B050-AA-EN-HASB-L6 drive is an Allen-Bradley 1336 PLUS II series motor control drive. The users can connect its input directly to an AC mains that provides it with 380 to 480 Volts AC 3-phase input voltage. The nominal output power rating of the drive is 50 Horsepower. This nominal output power rating is only available if the drive is used under the ambient conditions specified by Allen-Bradley for safe operation. One of the factors that affects the ambient conditions around the drive and its operating ratings is the drive enclosure. The 1336F-B050-AA-EN-HASB-L6 drive is available in an NEMA Type 1 enclosure that has an IP 20 ingress protection rating. The ambient operating temperature range supported by this type of enclosure is 0 to 40 degrees Celsius. All enclosures for 1336 PLUS II series drive support a maximum operating temperature of 40 degrees Celsius regardless of the ingress protection rating. The 1336F-B050-AA-EN-HASB-L6 drive can operate at up to 50 degrees Celsius without an enclosure, but it will be vulnerable to damage from debris and moisture.

The Allen-Bradley 1336F-B050-AA-EN-HASB-L6 1336 PLUS II series motor control drive does not feature a HMI (human-machine interface). Instead, it comes with a blank plate that the operators must use to cover the opening in the front panel of the drive where an HMI would normally be located. The blank plate prevents access to the hazardous parts that are located inside this opening and it keeps the opening free of debris and liquids. The blank plate must remain installed on the 1336F-B050-AA-EN-HASB-L6 drive unless an HMI is used to replace it. This drive needs to be programmed before operation, and it can be programmed with an HMI, a PLC, or an SLC that is connected to its serial port. The 1336F-B050-AA-EN-HASB-L6 motor control drive comes with a control interface module on its TB3 terminal block. This control interface module features 9 inputs and it is designed to operate at 115 Volts AC.