1336F-B050-AA-EN-HCSP-LA2-L6

The 1336F-B050-AA-EN-HCSP-LA2-L6 motor control drive is an Allen-Bradley 1336 PLUS II series motor control drive. It comes with an IP 20 (NEMA Type 1) protective enclosure and it operates with a nominal output power rating of 37 kilowatts (50 Horsepower). The 1336F-B050-AA-EN-HCSP-LA2-L6 drive supports enhanced ride-through capabilities thanks to its internal logic supply from the DC bus, and this internal logic supply does not require separate control power wiring. With its proactive current limit control feature, the drive has advanced torque capabilities and it will not experience unnecessary tripping. The 1336F-B050-AA-EN-HCSP-LA2-L6 drive operates with a 3-phase voltage range of 380 to 480 Volts AC. It also has an output frequency range of 0 to 400 Hertz and an output voltage range of 0 Volts to the rated voltage. The 1336F-B050-AA-EN-HCSP-LA2-L6 drive operates in English by default and it comes with a number of other optional features such as interface modules.

The Allen-Bradley 1336F-B050-AA-EN-HCSP-LA2-L6 1336 PLUS II series motor control drive has an optional HMI, an optional control interface, and an optional analog interface. The HMI is programmer-only HMI with an upload/download capability. The control interface operates at 115 Volts AC. The analog interface has 2 galvanically isolated and user-configurable inputs. The 1336F-B050-AA-EN-HCSP-LA2-L6 drive is also equipped with numerous sensors for dynamic current control and it is often used for starting low-inductance motors. It can also control standard-sized induction and synchronous motors with its flexible Volts per Hertz control technology and large induction motors with its powerful sensorless vector control technology. The 1336F-B050-AA-EN-HCSP-LA2-L6 motor control drive will automatically start lowering the level of output voltage that is applied to the motor if the actual current draw of the motor is much lower than the specified overload amps to save energy and reduce flux current.