The Allen-Bradley 1336F-B050-AE-EN is an Adjustable Frequency AC Drive part of the 1336 PLUS II series. This AC drive is working with an operating voltage of 380 to 480 Volts AC (± 10% acceptable). It is intended to be used with motors up to a 50 horsepower rating. It is enclosed with IP20 (NEMA type 1) enclosure that is standard suitable to be used on factory floors. English is the pre-programmed language setting applied to this device. Its output frequency range is 0 to 400 Hertz programmed with a 15-bit resolution. The 1336F-B050-AE-EN is equipped with many protective features like overcurrent, drive undervoltage and overvoltage, overheating, short-circuit, ground fault, and load loss. This drives implements open-loop sensorless vector control that adds exceptional torque performance, especially at low speeds. The Volt per Hertz control mode is also available as an addition to a perfect speed control.

The 1336F-B050-AE-EN AC drive provides an effective method for motor stopping by injecting a DC voltage into the motor for the desired time that can be programmed (up to 90 seconds). It supports automatically resetting of a fault (if the cause of an alarm is no longer present) and automatically restarts afterward. There is a fault buffer functionality designed to records the last four faults that happened. This buffer works with the FIFO method. Users can use 1336F-B050-AE-EN AC drive at 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) operating temperatures and store them at -40 to 70 degrees Celsius temperatures. It has a total weight of 38.6 kilograms (85 pounds) and a total volume of 301.8 x 701 x 255 millimeters (11.88 x 27.60 x 8.86 inches).