1336F-B050-AN-EN-GM1-HCS2-L6

The 1336F-B050-AN-EN-GM1-HCS2-L6 motor control drive is an advanced AC-powered drive from the Allen-Bradley 1336 PLUS II series. It is commonly used in high-performance 3-phase motor control applications. The 1336F-B050-AN-EN-GM1-HCS2-L6 drive can operate in a constant torque mode or in a variable torque mode. The drive is rated for 50 Horsepower of nominal output power in the constant torque mode. It is rated for 60 Horsepower of nominal output power in the variable torque mode. Allen-Bradley has designed the 1336F-B050-AN-EN-GM1-HCS2-L6 drive for operating with 3-phase AC input voltage. The operating voltage range of the drive is 380 to 480 Volts AC. The drive enclosure is open and its protection rating is IP 00. The drive is not protected from dust and moisture by this enclosure. Therefore, the 1336F-B050-AN-EN-GM1-HCS2-L6 drive must be installed inside a suitable control cabinet. The drive generates heat during operation and it relies on convection cooling for heat dissipation and to avoid overheating.

The maximum ambient temperature at which the Allen-Bradley 1336F-B050-AN-EN-GM1-HCS2-L6 1336 PLUS II series motor control drive can operate is 50 degrees Celsius. At higher temperatures, the internal temperature of the drive will rise to levels that can cause drive malfunctioning and even drive failure. There is an optional HMI module on the 1336F-B050-AN-EN-GM1-HCS2-L6 drive that the operators can use to program and configure it and to control it. Features supported by the HMI include a digital potentiometer and an upload/download capability. There is also a communication module on the 1336F-B050-AN-EN-GM1-HCS2-L6 drive that supports 1 Remote I/O channel. The 1336F-B050-AN-EN-GM1-HCS2-L6 drive also supports a control interface that operates at 115 Volts AC. Only trained personnel should install and maintain the 1336F-B050-AN-EN-GM1-HCS2-L6 drive to prevent installation errors that could cause performance and reliability issues.