1336F-B050-AN-EN-GM1-L6

The 1336F-B050-AN-EN-GM1-L6 drive is a motor control drive from the Allen-Bradley/Rockwell Automation 1336 PLUS II series. It can control the operating speed of a large induction motor or of 1 or more standard induction motors. The drive is designed to accelerate or decelerate the controlled motor to the appropriate speed for a specific application without creating friction in the motor. The 1336F-B050-AN-EN-GM1-L6 drive can serve as a motor speed control solution for a wide range of different applications, such as pump, fan, and conveyor system applications. The drive is compatible with all of the same components as every other 1336 PLUS II drive. The drive has the capacity to endure brief power outages and it offers 2 ways to operate in the event of a power failure. The 1336F-B050-AN-EN-GM1-L6 drive has a feature called the “flying start” that can be used when the drive needs to start operating at the same speed as a motor before accelerating or decelerating it. Other key features of the drive include the power loss ride-thru, slip compensation, process PI control, auto economizer, and fault reset and run features.

In addition to its wide range of standard features, the Allen-Bradley/Rockwell Automation 1336F-B050-AN-EN-GM1-L6 1336 PLUS II series motor control drive comes with several optional features such as a control interface and a communication interface that equip it for specific applications. The control interface operates at 115 Volts AC and the communication interface is a single-point Remote I/O interface. The 1336F-B050-AN-EN-GM1-L6 drive operates in an unusually wide temperature range of 0 to 50 degrees Celsius because it does not have an enclosure which would trap heat around it, and it is meant to be used and stored in a dry and clean controlled environment. The 1336F-B050-AN-EN-GM1-L6 drive’s enclosure has an IP 00 environmental protection rating, and it is not waterproof or dust-tight. This motor control drive’s 3-phase input voltage range is between 380 and 480 Volts AC and its nominal output power rating is 50 Horsepower. The 1336F-B050-AN-EN-GM1-L6 drive can operate in the sensorless vector control mode and the Volts per Hertz control mode.