1336F-B050-AN-EN-GM2-HAS2-LA4-L6

The Allen-Bradley 1336F-B050-AN-EN-GM2-HAS2-LA4-L6 motor control drive is an AC-powered drive from the 1336 PLUS II series. The drive is equipped with several optional factory-installed hardware modules which are different types of interfaces. One of these modules is an HMI module that can operate as a programmer device or as a control device and which is equipped with a digital potentiometer. The 1336F-B050-AN-EN-GM2-HAS2-LA4-L6 drive is also equipped with a control interface module that operates at 115 Volts AC. In addition, there is an analog I/O module on the 1336F-B050-AN-EN-GM2-HAS2-LA4-L6 drive with 2 channels. One of these channels is an input channel and the other one is an output channel. Both channels on the analog I//O module are configurable and galvanically isolated. The  1336F-B050-AN-EN-GM2-HAS2-LA4-L6 drive is also equipped with a serial communication adapter interface module. The operators can configure the serial communication interface to support the DH-485, DF1, RS-232, RS-485, and RS-422 communication options.

The Allen-Bradley 1336F-B050-AN-EN-GM2-HAS2-LA4-L6 1336 PLUS II series motor control drive can deliver 50 Horsepower or 37 kilowatts of maximum nominal output power to the connected motor. The drive’s output rating falls below 50 Horsepower if the ambient temperature exceeds 50 degrees Celsius or if the elevation of the installation site is more than 1000 meters above sea level. The 1336F-B050-AN-EN-GM2-HAS2-LA4-L6 drive can operate at a maximum ambient temperature of 50 degrees Celsius because it has an open enclosure that dissipates more heat than stronger enclosures. The input voltage rating of the 1336F-B050-AN-EN-GM2-HAS2-LA4-L6 motor control drive is 380 to 480 Volts AC and the drive can only operate with 3-phase AC input voltage. Its operating frequency range is 50 to 60 Hertz and its frequency tolerance range is 48 to 62 Hertz.