The 1336F-B200-AN-EN drive is a 1336F Plus II AC drive manufactured by Allen-Bradley that has nominal output power ratings of 200 Horsepower or 149 kilowatts. This unit can drive 3-phase motors at different speeds depending on the frequency generated at the output side (the available frequency range is 0 to 400 Hertz). This 3-phase drive is an English-language drive that operates at 380 to 480 Volts AC voltage (50 to 60 Hertz). The 1336F-B200-AN-EN drive is not protected with an enclosure. Although this makes the drive more sensitive to dust particles or water, it also enables better cooling and a wider operating temperature range (0 to 50 degrees Celsius). It should be used at a maximum altitude of 1000 meters. The drive is equipped with advanced electrical circuit-protecting procedures that rely on the inverse time or I2T characteristic which is the same as a usual overload relay.

The Allen-Bradley 1336F-B200-AN-EN drive can reach ±0.01% of the set output frequency which makes it one of the most accurate open-loop controllers on the market. It generates a PWM signal that carries the amplitude of an analog signal over constant amplitude square wave pulses. The width of these pulses is directly related to the amplitude of the original modulated analog signal. The 1336F-B200-AN-EN drive requires only basic cleaning and connector checking as a part of a standard maintenance procedure that should be performed periodically. Turn off the drive and wait at least 5 minutes after turning it off before carrying out any maintenance work on the drive to avoid electric shock. Static control procedures are necessary because the drive has sensitive electronic parts.