The 1336F-BRF07-AA-EN-GMS5 drive is a 1336 PLUS II drive manufactured by Allen-Bradley. Its ratings are 380 to 480 Volts AC or 513 to 620 Volts DC 3-phase voltage, and 0.56 kilowatts or 0.75 Horsepower of output power. It is equipped with advanced motor speed and torque controls that are suitable for a variety of applications.  This drive does not require additional switching circuits to routinely apply or cut off the line power. Its start/stop modes are controlled by its I/O signals. The GM5 communication adapter module that comes with a snap-in cradle on the 1336F-BRF07-AA-EN-GMS5 drive allows it to be configured, controlled, or programmed through the drive’s SCANport. It can take speed commands from different sources such as the speed select inputs on Terminal Block 3 (TB3) and programmable logic controllers. Note that this drive has an English language module.

Multiple programmable motor control algorithms are available on the Allen-Bradley 1336F-BRF07-AA-EN-GMS5 1336 PLUS II drive. It features 2 acceleration and deceleration times, each of which can be programmed with durations anywhere between 0 and 3,600 seconds in length in 0.1-second increments. Diagnostic components on the 1336F-BRF07-AA-EN-GMS5 drive offer real-time preventive maintenance and fault reporting. The metal oxide varistor on this drive provides voltage surge suppression (for transient protection only), and it provides phase-to-phase and phase-to-ground protection too. Its compact design saves cabinet space and its auto economizer feature optimizes energy conservation. The recommended minimum mounting clearance that should be observed to allow adequate airflow on the 1336F-BRF07-AA-EN-GMS5 drive is 6 inches of vertical space and 4 inches (horizontal). It features an IP20 (NEMA 1) enclosure and its ambient operating temperature range is from 0 to 40 degrees Celsius.