The Allen-Bradley 1336F-BRF10-AA-EN-HAS1-L5 is a 1336 PLUS II series AC drive which can operate in both constant and variable torque modes. Drives from the Allen-Bradley 1336 PLUS series are engineering for speed control applications and support a wide range of output power ratings from 0.5 to 600 Horsepower. The input of the 1336F-BRF10-AA-EN-HAS1-L5 is designed for 380 to 480 Volts AC voltage. While the drive supports both 3-phase and single-phase input, the power and current ratings are only valid when 3-phase input is applied. For constant torque mode, the input of the 1336F-BRF10-AA-EN-HAS1-L5 draws 2.6 Amps and its output is rated at 1 Horsepower and 2.1 Amps. For variable torque mode, the drive input draws 2.8 Amps and its output is rated at 1 Horsepower and 2.3 Amps.

The Allen-Bradley 1336F-BRF10-AA-EN-HAS1-L5 drive features a programmer and controller with an analog potentiometer. English is the language supported by the HMI. The I/O available on the drive support both 24 Volts DC and 24 Volts AC. The NEMA type 1 enclosure of the 1336F-BRF10-AA-EN-HAS1-L5 is rated as an IP20 enclosure. The A1 frame of the drive weighs approximately 4.3 kilograms and it measures 11.4 x 8.5 x 4.15 inches. Horizontal spacing of 4 inches should be provided between adjacent drives to ensure adequate airflow. Additionally, 6 inches of vertical spacing should also be provided. For input protection, the dual element time-delay fuse that is used should have a minimum rating of 3 minutes and maximum rating of 4.5 minutes. The minimum and maximum ratings for a non-time delay fuse are 3 and 8 minutes, respectively.