The 1336F-BRF10-AA-EN-HAS1-L6 drive is a 1336 PLUS II series adjustable frequency AC drive that is designed and manufactured by Allen-Bradley. This drive is the most reliable device that has been designed for motor speed control over the past decade. The 1336F-BRF10-AA-EN-HAS1-L6 drive can take an AC voltage of 380 to 480 Volts AC and a DC voltage of 513 to 620 Volts DC on the input side. It can be managed locally over the human-machine interface with an analog potentiometer. The users can input parameters, read out warning messages, and change the reference speed over this module which also has uploading and downloading capabilities.

The 1336F-BRF10-AA-EN-HAS1-L6 drive is easy to install by attaching it to a panel, but this procedure and the cabling of the unit are not enough for a complete and successful installation. This 3-phase AC drive takes in 380 to 480 Volts AC voltage and 50 to 60 Hertz frequency and it gives out a variable voltage and frequency to the motor. In this process, the drive gives off some heat. Although this drive has only 1 Horsepower of output power and does not have a significant amount of heat dissipation, it is important to provide proper cooling to the drive or it will shut down because of excessive temperature. The Allen-Bradley 1336F-BRF10-AA-EN-HAS1-L6 applies the sensorless vector control algorithm accompanied by a 115 Volts AC rated I/O control module. There is no feedback device and the control is performed in the open loop. The unit is small in size, it has an IP20 rated enclosure, and it meets all the industrial demands for reliability, flexibility, and space. It provides 3-phase induction motors with adequate power and economy and it protections them against various electrical hazards.