The Allen-Bradley/Rockwell Automation 1336F-BRF100-AA-EN-HA2-L8E drive is a variable speed controller. It has an input current rating of 16.4 Amps and its output current is rated at 16.1 Amps under a constant torque. The 1336F-BRF100-AA-EN-HA2-L8E has its input voltage rated and between 380 and 480 Volts AC. When the controller is waiting to be mounted, Allen-Bradley recommends that it be stored in an environment with an ambient temperature ranging from a minimum of -40 degrees Celsius to a maximum of +70 degrees Celsius. The 1336F-BRF100-AA-EN-HA2-L8E features a human-machine interface module to make interfacing the controller with its operators easy. However, the human-machine interface module only supports programmer or controller functions and a digital speed pot. Additionally, the 1336F-BRF100-AA-EN-HA2-L8E features an encoder feedback device which can be used with encoder loss detection. Also on its control interface option, the controller accommodates both AC and DC voltages, both rated at 24 Volts.

The 1336F-BRF100-AA-EN-HA2-L8E drive, as with any other Allen-Bradley AC controller, uses the encoder feedback device for quality speed regulation. Since the 1336F-BRF100-AA-EN-HA2-L8E belongs to the Allen-Bradley/Rockwell Automation 1336 PLUS II series of controllers with a variable speed, the encoder feedback option provides closed loop speed regulation from no load to a full load of 0.1%. Note that the 1336F-BRF100-AA-EN-HA2-L8E drive features programmer options that dictate what happens when the encoder signal is lost. This may include shutting down the axis to avoid runaway conditions. The controller has a Horsepower rating of 10 Horsepower. However, note that this horsepower rating is calibrated when the 1336F-BRF100-AA-EN-HA2-L8E drive is operating at normal duty. The controller is supplied with an English manual and an IP00 rated enclosure.