The Allen-Bradley 1336F-BRF100-AA-EN-HCS1-L6 is a variable frequency drive. The drive has a minimum logic control ride-thru protection rating of 0.5 seconds and a typical logic control ride-thru protection of 2 seconds. While in operation, the 1336F-BRF100-AA-EN-HCS1-L6 can only comfortably handle 15 G of shock within a span of 11 milliseconds at an allowance of either plus or minus 1.0 milliseconds. Additionally, Allen-Bradley stipulates that the 1336F-BRF100-AA-EN-HCS1-L6 drive should not be operated in environments that have a shock exceeding 1 G and which could cause a displacement of more than 0.006 inches. Since the 1336F-BRF100-AA-EN-HCS1-L6 drive is electronic equipment, it should not be installed or operated in environments that have condensing humidity. Instead, the 1336F-BRF100-AA-EN-HCS1-L6 and other Rockwell Automation variable frequency drives should be operated in environments with a relative humidity not exceeding 95% and not falling below 5% without condensation.

The Allen-Bradley 1336F-BRF100-AA-EN-HCS1-L6 drive belongs to the Allen-Bradley/Rockwell Automaton 1336 PLUS II series of variable frequency drives. For the hardware current limit, the 1336F-BRF100-AA-EN-HCS1-L6, like other drives in the same series, has an overcurrent trip protection rating of between 180% and 250% of the VT rated current. Additionally, the drive has an overcurrent trip protection (instantaneous current limit) of between 220% and 300% of the VT rated current. The 1336F-BRF100-AA-EN-HCS1-L6 has a human-machine interface module with an analog pot, uploading and downloading capabilities, and programmer/controller functions. The drive supports 115 Volts AC at its control interface voltage.