The 1336F-BRF100-AE-FR is a 1336 Plus II series drive with a voltage rating of 380 to 480 Volts AC. The drive can also be supplied with 513 to 620 Volts DC if that voltage is more appropriate to the users’ needs. The drive has a power output rating of 7.5 kW (10 Horsepower). It has an IP20 enclosure type, and it implements EMC filtering. The 1336F-BRF100-AE-FR has simple tuning procedures for optimum torque performance whether the sensorless vector control or the Volts/Hertz control algorithm is applied. This 1336 PLUS II series variable frequency AC drive provides extreme speed control and exceptional industrial competency. It can host various I/O, special functions, and communications modules to become an even more application-friendly device. The unit can deliver immediate diagnostics on faults (even with custom status reports).

The 1336F-BRF100-AE-FR can deliver out-of-the-box performance, which means that users can connect motors to the drive and immediately have a functional system. To gain enhanced performance, however, certain programming efforts must be made, such as programming the setup parameters with actual motor nameplate values. The 1336F-BRF100-AE-FR uses digital inputs and outputs to interface with devices such as push buttons, selectors, relays, and PLC digital I/O modules. Some digital inputs have a pre-set function assigned to them while the others are freely programmable. The most common input functions of the 1336F-BRF100-AE-FR drive are the start/stop functions, forward/reverse functions, fault signals, the E-stop signal, and the pre-set speed selections. The user manual for the device is printed in French.